diX C | diX N | Test Method (ASTM) | Epoxies | Urethanes | Density | g/cm3 | 1.31 | 1.11 | D1505 | 1.1-1.4 | 1.1-2.5 |
Refractive welcome | 1.65 | 1.66 | D542 | 1.55-1.61 | 1.50-1.60 | ||
Tensile Modulus | GPa | 3.2 | 2.4 | D882 | |||
Tensile Strength | psi(lb/in2) | 9,800 | 6,800 | D882 | 4,000-13,000 | 1,000-10,000 | |
MPa | 67.6 | 46.9 | D882 | 28-90 | 7-69 | ||
Yield Strength | psi(lb/in2) | 9,500 | 7,250 | D882 | |||
MPa |
65.5 |
50.0 | D882 | ” width=”1″ height=”1″ /> | ” width=”1″ height=”1″ /> | ||
Elongation to Break | % | 270 | 30 | D882 | 3-6 | 100-1,000 | |
Yield Elongation | % | 3.6 | 2.5 | D882 | |||
Rockwell Hardness |
|
R80 | R85 | D785 | M80-M110 | – | |
Pencil Hardness | 2H | 3B | JIS K5600-5-4 | ” width=”1″ height=”1″ /> | ” width=”1″ height=”1″ /> | ||
Coefficient of Friction | Static |
|
0.29 | 0.25 | D1894 | ” width=”1″ height=”1″ /> | ” width=”1″ height=”1″ /> |
Dynamic |
|
0.29 | 0.25 | D1894 | ” width=”1″ height=”1″ /> | ” width=”1″ height=”1″ /> | |
Melting Point | 291 | 420 | D3417 | – | <170 | ||
Linear Coefficient of Expansion |
10-6/ |
30.1 | 69.0 | – | 45-65 | 100-200 | |
Dielectric Constant | 60Hz |
|
3.10 | 2.65 | D150 | 3.5-5.0 | 5.3-7.8 |
1KHz |
|
2.83 | 2.65 | D150 | 3.5-4.5 | 5.4-7.6 | |
1MHz |
|
2.87 | 2.67 | D150 | 3.3-4.0 | 4.2-5.2 | |
1GHz |
|
2.81 | ” width=”1″ height=”1″ /> | – | ” width=”1″ height=”1″ /> | ” width=”1″ height=”1″ /> | |
Dissipation Factor | 60Hz |
|
0.027 | 0.0002 | D150 | 0.002-0.01 | 0.015-0.05 |
1KHz |
|
0.015 | 0.0002 | D150 | 0.002-0.02 | 0.04-0.06 | |
1MHz |
|
0.014 | 0.0009 | D150 | 0.03-0.05 | 0.05-0.07 | |
1GHz |
|
0.001 | ” width=”1″ height=”1″ /> | – | ” width=”1″ height=”1″ /> | ” width=”1″ height=”1″ /> | |
Dielectric Strength | V/mil | 6,900 | 7,000 | D149 | 4,500-5,600 | 5,000-5,600 | |
Volume Resistivity 23,50%RH |
cm |
6.9×1016 |
1.4×1017 |
D257 |
1012-1017 |
1011-1015 |
|
Surface Resistivity 23,50%RH |
|
2.2×1015 |
1.0×1013 |
D257 |
1013 |
1014 |
|
Water Absorption 24hr | % | <0.1 | <0.1 | D570 | <0.1-0.2 | <0.1-1.5 | |
Moisture Vapor Transmission 24hr,37,90%RH |
gmil
/100in2 |
0.016 | 1.6 | F1249 | 1.8-2.4 | 2.4-8.7 | |
Oxygen Transmission 24hr,1atm,23 |
cm3mil
/100in2 |
5.38 | 206 | D3985 | 5-10 | 200 |
Parylene Engineering has implemented and maintains a Quality Management System. Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard:
We are ITAR Registered
Copyright © Paylene Engineering 2023. All rights reserved